Free-standing cabinet RTA

Free-standing cabinet RTA

Welded skeleton with demountable side panels and back panel,
IP 20, loading capacity 1200/1500 kg

Strengthened skeleton

Cold-rolled steel 1,3 mm.

Sliding rail fixed at four points

Cold-rolled steel 2,5 mm.

Tritón handle

By replacing the plastic inlet (not supplied), a classic or half-cylindric lock can be selected. Patent: PUV 2013-27443.

Wider body rails

Wider rails in the body of a cabinet are intended for an additional installation of 19“ power management panels, which afterwards do not occupy space within the cabinet. Thanks to this smart solution of gripping, it does not block the sliding servers even for the 600 mm cabinet type. In addition to this solution, the A5 version (at the end of the cabinet code) is characterized by break-out blanking panels for possible cable input and management in between neighbouring cabinets.

Read more

Perforated skeleton rails

Square perforation for the captive nuts alongside the entire height of the rail in the unit span allows additional accessory installation.

Laser unit marking

19“ vertical rails (zinc-coated 2 mm cold-rolled steel) are laser marked at every installation unit.

Main earthing point M8

Hook-on hinges

Standard hinges can be replaced by comfortable-to-use hook-on version. 

Bonding

All detachable parts are bonded in accordance with appropriate standard.

Break-out cable entries

Large amount of cable entries allows comfortable installation cable, also called as patch-rod guiding.

Fringe edge

Supply includes 1 m.

800 mm wide cabinets

15 U - 47 U height

Flex frame

Cabinets with the width of 800 mm have a system, which allows installation of sliding rails in a span of 19“,21“ and 23“.

Optional Accessory

RAC-VP-D5x-X1

Horizontal cable management.

RAX-VP-Vxx-X2

Vertical cable management in skeleton.

Power distribution units installed in skeleton

Possibility of installing PDU in cabinet´s skeleton rails using holders (optional accessory).

Increased IP30 protectionRAC-IP-X01-X1

It is possible to increase IP protection of the cabinet to IP30 by simply mounting of protective rails on top and on bottom part of the front door frame and rear cover frame.
RAC-IP-X01-X1 for 600mm wide cabinets 
RAC-IP-X02-X1 for 800mm wide cabinets

Supply includes: 
profile for mounting to the door, rear cover …..........................…. 4x 
blanking panel in the bottom part …………………...............…......…. 12x 
blanking panel in the top part for 600mm wide cabinet ……...…. 13x 
blanking panel in the top part for 800mm wide cabinet …...….… 15x 

Load increase from 1200 to 1500 kg

19“ rail strength member RAX-VR-Txx-X2

Close profile (4 pcs) - 1,5 mm cold-rolled steel. It increases the loading capacity of the cabinet up to 1500 kg.

Recommended strengthening kit RAX-VR-Txx-Yx

Kit for 800 mm wide cabinets increase cabinet stability and provide cable management.

Product variants

Description, usage

  • 19" free-standing cabinet with IP20 protection.
  • Cabinet includes 4 sliding vertical rails for device mounting (6 rails for cabinets deeper than 800 mm).
  • Cabinet construction:
       – Welded steel frame with removable side panels.
       – Single or double doors in all metal versions, perforated (80% and 86% air permeability) or glazed with safety tempered glass 4 mm. They can be on the front or back of the cabinet
       – Preparation for installation of vertical cable management panels and power distribution units, including mounting brackets, to the frame of the cabinet.
       – Preparation for joining the cabinets together.
       – A5 and A7 version have a breakout cable entries in the frame for the cabling between cabinets.
  • The maximum recommended load of the cabinet is 1200 kg, maximum load of the door is 20 kg.
  • The racks are designed for installation of data and telecommunication equipment and distribution systems
  • The frame of the cabinet and all removable parts (side and rear covers, doors…) are bonded with patch cables that have to be properly fixed and inserted into connectors throughout the period of use of the cabinet.
  • There is one M8 screw placed on the bottom part of the cabinet to connect the earthing wire.
  • Can be mounted on castors and levelling feet (models A1 and A5).
  • Cable openings covered with breakout-type blanking panels are placed in the top and the bottom part of the cabinet.

More info

Operation conditions

Operation environment

  • the office
  • the cabinet is not intended for outdoor installations and for installations in environment that can negatively influence the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings).

Must be protected against

  • mechanical damage,
  • improper handling,
  • a different usage than the cabinet is intended for.

Improper handling is especially

  • overloading (exceeding the maximum recommended load),
  • device installation that can negatively influence the operation and function of the cabinet or the installed equipment,
  • change of the construction or design of the cabinet.

Installation of the cabinet

  • To ensure the maximum recommended load, it is necessary to distribute the load evenly.
  • Place the cabinet on a flat floor and adjust any differences using levelling feet.
  • To avoid dust penetration in case the cables lead through some of the cable openings, it is possible to sealed it using a blanking panel with a brush and equip it with a hem edge (both are included in the supply).

Environmental protection

  • All parts are made of recyclable materials and after decommissioning the cabinet, they must be disposed of according to relevant regulations.

Certificate and conformity

  • This product is fully in accordance with ČSN EN 62208 ed.2:2012 (EN 62208:2011).

Downloads

Photogallery