SNA - hybrid cabinet
Power distribution module of hybrid cabinets for home distribution systems. IP30/IK06
Removable door

Cover frame
Unique door design
Terminal block PE + N
Mounting variability
Read more
SNA | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type |
height A | width B | depth C |
Span |
Heat |
Number |
Weight |
Weight | |||||||||||
(mm) | R1 | R2 | |||||||||||||||||
SNA-01-C51-YXX-X1 |
166 | 500 | 110 | 76 | 390 | 25 | 1 x 22 | 4,6 | 4,4 | ||||||||||
SNA-02-C51-YXX-X1 |
333 | 500 | 110 | 243 | 390 | 41 | 2 x 22 | 6,7 | 6,4 | ||||||||||
SNA-03-C51-YXX-X1 |
500 | 500 | 110 | 410 | 390 | 58 | 3 x 22 | 7 | 6,7 |
The recess for the installation of the cabinet in the wall must be 15-20 mm larger in each direction than the size of the cabinet.
*Scattering of thermal energy is set by calculation according IEC 890+A1 for: cabinet with its back to the wall, without fan openings, horizontal bulkhead, heating 20 K in 3/4 of the hight of the cover.
SNA - Flat door version cabinet
Slide lock
Flat door
DIN rails
The terminal PE + N was also maintained and the space under the DIN rails still allows comfortable connecting of the conductors.
SNA - Flat door version cabinet | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | height A | width B | depth C |
Span |
Heat |
Number |
Weight |
Weight | |||||||||||
(mm) | R1 | R2 | |||||||||||||||||
SNA-01-C51-YXX-X2 |
166 | 500 | 110 | 76 | 390 | 25 | 1 x 22 | 4,6 | 4,4 | ||||||||||
SNA-02-C51-YXX-X2 |
333 | 500 | 110 | 243 | 390 | 41 | 2 x 22 | 6,7 | 6,4 | ||||||||||
SNA-03-C51-YXX-X2 |
500 | 500 | 110 | 410 | 390 | 58 | 3 x 22 | 7 | 6,7 |
The recess for the installation of the cabinet in the wall must be 15-20 mm larger in each direction than the size of the cabinet.
*Scattering of thermal energy is set by calculation according IEC 890+A1 for: cabinet with its back to the wall, without fan openings, horizontal bulkhead, heating to 20 K in 3/4 of the hight of the cover.
Description, usage
- IP30/IK06
- Cabinet is hung directly on the wall or can be installed in a prepared recess in the wall.
- Cabinet is designed for individual assembly or with cabinet RNA.
- Multigate (cable openings) on the top, bottom and both side panels of the cabinet alow joinning the cabinet into the larger sets with other cabinets of this series including an data cabinets RNA type.
- Cabinet construction:
– Welded frame from 1 mm thick sheet steel.
– Steel door of 1 mm thickness. - The frame of the cabinet and all removable parts (side and rear covers, doors…) are bonded with patch cables that have to be properly fixed and inserted into connectors throughout the period of use of the cabinet.
- There is one M8 screw placed on the bottom part of the cabinet to connect the bonding.
- Cable openings covered with breakout-type blanking panels are placed in the top and the bottom of the cabinets, as well as on the sides.
- Maximum permissible load – cabinet: 20 kg; door: 2 kg.
More info
Operation conditions
Operation environment
- the office
- the cabinet is not intended for outdoor installations and for installations in environment that can negatively influence the functionality of the cabinet and the mounted devices (e.g. environment with danger of explosion or humid and wet surroundings).
Must be protected against
- mechanical damage,
- improper handling,
- a different usage than the cabinet is intended for.
Improper handling is especially
- overloading (exceeding the maximum recommended load),
- device installation that can negatively influence the operation and function of the cabinet or the installed equipment,
- change of the construction or design of the cabinet.
Installation of the cabinet
- To ensure the maximum recommended load, it is necessary to distribute the load evenly.
- Place the cabinet on a flat floor and adjust any differences using levelling feet.
- To avoid dust penetration in case the cables lead through some of the cable openings, it is possible to sealed it using a blanking panel with a brush and equip it with a hem edge (both are included in the supply).
Environmental protection
- All parts are made of recyclable materials and after decommissioning the cabinet, they must be disposed of according to relevant regulations.
Certificate and conformity
- This product is fully in accordance with ČSN EN 62208 ed. 2 (357040), (EN 62208:2011), (idt IEC 62208:2011).